- Utility Rebate
Low Income Weatherization Program (LIWP)
Requirements
Farmworker Housing Component installs no-cost energy efficiency improvements and/or solar PV systems for qualified farmworker households. Funded by the State of California to help households save energy and reduce greenhouse gas emissions, the program lowers energy costs for families and makes other improvements to improve the livability of housing.
This program is delivered by La Cooperativa Campesina de California and MAROMA Energy Services in partnership with a network of local contractors. For more information call: (833) FOR-LIWP or (833) 367-5497.
Who Can Apply
ContractorsHomeownersRentersBuilding Type- Multi-family
- Single-family
- Utility Rebate
Save $3,500 per unit - Rebate on Heat Pump Water Heater
Requirements
NEEA Tier 3 or higher
City of Palo Alto residents are eligible for a rebate of $3,500 for a Heat Pump Water Heater replacing a gas water heaters. $500 rebate is available for electric water heaters that are replaced with heat pump water heaters.
Who Can Apply
ContractorsHomeownersRentersBuilding Type- Multi-family
- Single-family
- Utility Rebate
Save $2,500 - Rebate on Gas Meter Removal
Requirements
$2,500 Gas Meter Removal Incentive:
- Must completely remove existing gas meter(s) and connection to the property.
- Proof of meter removal required. Applicant must have submitted the Gas Utility Disconnection for Electrification Form and received a confirmation email form Utilities Customer Service.
Incentive Amount:
$2,500
$5,000 for REAP eligible residents (Income-qualified)
Who Can Apply
ContractorsHomeownersBuilding Type- Single-family
- Utility Rebate
Save $2,500 - Rebate on Heat Pumps, Ducted (central air, HVAC), Heat Pumps, Ductless (mini-split)
Requirements
Heat Pump Heating, Ventilation, and Air Conditioning (HP HVAC) Rebate eligibility requirements:
- Must replace an existing gas, propane, oil, or wood stove heater/furnace. Replacement of electric heaters and fireplaces are not eligible.
- All fully electric HP HVAC systems qualify, regardless of types and configuration (packaged/split, ducted/ductless, single/multi-zoned), amperage, tonnage, or efficiency rating. Dual-fuel systems with gas heat as backup do not qualify.
- The heat pump must have a 15 SEER (Seasonal Energy Efficiency Ratio) rating or higher, and an 8.5 HSPF (Heat Seasonal Performance Factor) or higher.
- Limited to one HP HVAC rebate per electric account.
Incentive Amount:
$2,500
$5,000 for REAP eligible residents (Income-qualified)
Who Can Apply
ContractorsHomeownersBuilding Type- Single-family
- Utility Rebate
Save $1,000 - Rebate on Panel Upgrades
Requirements
Electric Panel Upgrade Add-On Rebate eligibility requirements:
- Can include replacement, upgrade, or relocation of a main service panel, installation of a subpanel, and/or installation of a smart load center that is necessary for the installation of a new HPWH or HP HVAC.
- Panel replacements that maintain the same amperage are eligible.
- If the panel replacement increases the amperage of the electrical panel, the new panel’s amperage must not exceed 200 amps.
- The electrical panel upgrade must take place within 6 months of the HPWH or HP HVAC installation to qualify.
- This rebate is an add-on rebate, not a standalone rebate, and therefore cannot be applied for on its own. The rebate is applied for at the same time as a HPWH and/or HP HVAC application.
- Limited to one panel upgrade rebate per electric account.
Incentive Amount:
$1,000
$2,000 for REAP eligible residents (Income-qualified)
Who Can Apply
ContractorsHomeownersBuilding Type- Single-family
- Utility Rebate
Save $1,000 maximum ($0.75/sqft) - Rebate on Insulation and Ductwork
Requirements
Attic/Roof Insulation Add-on Rebate Eligibility:
- Acceptable Insulation Materials include: Fiberglass Batts, Blown Fiberglass, Cellulose, Dense Pack Cellulose, Rockwool, Spray Foam, Rigid Foam, Mineral/Stone Wool, Natural Fiber, or recycled textiles.
- Insulation must meet R-30 or better for attic insulation. For Eichler homes and homes with a flat roof, insulation must meet R-19 or better.
- This rebate is an add-on rebate, not a standalone rebate, and therefore cannot be applied for on its own. The rebate is applied for at the same time as a HPWH and/or HP HVAC application.
- Insulation upgrade must take place within 6 months of the HPWH or HP HVAC installation to qualify.
Who Can Apply
ContractorsHomeownersBuilding Type- Single-family
- Utility Rebate
Save $500 per device up to $2,000 per household - Rebate on Wiring
Requirements
Prewiring, Wiring, and Circuit Splitter/Pauser Device Add-on Rebate Eligibility Requirements:
- All circuits must be wired to the source (wire and breaker).
- Circuit pausers or splitters are eligible.
- Must be installed in compliance with the California Electrical Code.
- This rebate is an add-on rebate, not a standalone rebate, and therefore cannot be applied for on its own. The rebate is applied for at the same time as a HPWH and/or HP HVAC application.
- Pre-wiring must take place within 6 months of the HPWH or HP HVAC installation to qualify.
- Must serve a new HPWH or HP HVAC system.
Who Can Apply
ContractorsHomeownersBuilding Type- Single-family
- Utility Rebate
100% financing for home improvement projects - PACE financing program
Requirements
Renew Financial specializes in the Property Assessed Clean Energy (PACE) financing program, a unique and easy-to-use financing solution that allows homeowners in participating communities to make energy-efficient home improvements with competitive fixed interest rates, terms of up to 30-yrs for some projects, and no money down. Qualification is primarily based on your home’s equity and not your credit score. Find out today if your home is eligible for PACE financing at www.renewfinancial.com.
Who Can Apply
ContractorsHomeownersRentersBuilding Type- Single-family